D&D Breakout Low Cat 2:1 Full Exhaust
Product Description :
2013-2017 Harley Softail Breakout Low Cat 2 into 1 Low Cat header design offers an upswept muffler for increased ground clearance on lowered Softail motorcycles.
2:1 Low Cat is a stepped header system at the head is 1 3/4" to 1 7/8" at collector and 2 1/4" where the muffler goes to the header.
All full systems are equipped with heat shields, bolt kit, brackets, exhaust gaskets and baffles.
Each exhaust system is designed and dyno tested in our facilities.
Our testing is done with the Harley Tuner's
Every pipe is designed to increase low-end torque and horsepower.
Performance increases are about 8 to 10 percent with the proper tune on the bike.
Baffles
Louvered Wrapped baffles
No other baffle available
2:1 Low Cat comes with 12mm and 18mm O2 sensor bungs.
At idle, the motorbike is deep, boomy and full of character.
Not only does the pipe look good, it is a wonderfully sounding experience for the rider.
2:1 Low Cat is a stepped header system at the head is 1 3/4" to 1 7/8" at collector and 2 1/4" where the muffler goes to the header.
All full systems are equipped with heat shields, bolt kit, brackets, exhaust gaskets and baffles.
Each exhaust system is designed and dyno tested in our facilities.
Our testing is done with the Harley Tuner's
Every pipe is designed to increase low-end torque and horsepower.
Performance increases are about 8 to 10 percent with the proper tune on the bike.
Baffles
Louvered Wrapped baffles
No other baffle available
2:1 Low Cat comes with 12mm and 18mm O2 sensor bungs.
At idle, the motorbike is deep, boomy and full of character.
Not only does the pipe look good, it is a wonderfully sounding experience for the rider.